Nearly 1,000 steel tubular piles for A27 noise barriers

Steel tubes for noise barrier foundations along the A27 between Gorinchem and Everdingen.

Nearly 1,000 steel tubular piles for A27 noise barriers

Solines is supplying nearly 1,000 steel tubular piles for the foundations of new noise barriers along the A27 motorway between Gorinchem and Everdingen in the Netherlands. The work includes a section near Scheiwijk. At Hoogblokland, the first piles are already in place. The installation team is using a Liebherr crawler crane from P. Luyben & Zn.

Solines is supplying steel tubes in two sizes: Ø 508.0 × 8.00 mm and Ø 610.0 × 8.00 mm. The tubes range from 8 to 12 metres in length. All are made from S235JRH steel and supplied with a type 3.1 inspection certificate.

A hydraulic vibratory hammer suspended from the crawler crane drives the piles into the ground. The hammer clamps onto the top of each tube and vibrates it vertically. This reduces friction between the tube and the surrounding soil, allowing the pile to sink further. The crane operator keeps the pile aligned as it goes in.

Hoogblokland lies on the Houten–Hooipolder section of the A27, where the Dutch road authority, Rijkswaterstaat, is upgrading and widening the motorway. The project includes work on the road, bridges and viaducts, as well as new noise barriers at several locations. The steel tubular piles support the barriers, which help reduce traffic noise for nearby residents.

Do you need steel tubular piles for your project?
Contact our sales team to discuss the dimensions, steel grade and any fabrication work you need. Call +31 168 35 66 55 or email sales@solines.nl.

A steel tubular pile entering the ground at the A27 noise barrier site.
A row of steel tubular piles marks the line of the new noise barrier along the A27.
A crawler crane uses a vibratory hammer to drive a steel tubular pile into the ground.
A hydraulic vibratory hammer grips the top of a steel tube.

Share this post