Solines has longitudinally welded steel tubes measuring Ø 273.0 x 7.10 millimeters available directly from stock. Offered with the specification L360NE / EN10219, these tubes are supplied in long lengths. The batch totals nearly 1,500 meters and weighs more than 68 metric tons.

For foundation contractors and steel fabricators, tubes measuring Ø 273.0 x 7.10 millimeters can be considered for tubular foundation piles in new construction or foundation repair, as well as columns and bracing in steel structures. Suitability depends on the structural design, verified material properties, condition, and tolerances. Foundation applications also require assessment of ground conditions and the selected piling system.

For tubes measuring Ø 273.0 x 7.10 millimeters, our custom processing includes sawing to project lengths to reduce cutting on site. Subject to technical review, we can also bell the tube ends to help join tube sections or bevel them to prepare welded joints. Processing is matched to the material and connection design. The tubes are available from stock; processing and shipment are scheduled separately.

Request a quote for these steel tubes Ø 273.0 x 7.10 millimeters from Solines B.V. in Moerdijk, the Netherlands. Call +31 168 356655 or email sales@solines.nl. You can also ask about the same diameter with a different wall thickness or other specifications. Share your required quantity and processing requirements so we can discuss the options.

Longitudinally welded steel tubes Ø 355.6 x 8.00 millimeters in grade S355J2H to EN10219 are available directly from stock. Each tube is approximately 12.00 meters long. This large batch totals over 4,300 meters, with a total weight of nearly 300 metric tons.

Potential applications for steel tubes Ø 355.6 x 8.00 millimeters include tubular foundation piles, structural columns and temporary tubular struts in civil engineering projects. Suitability must be verified against the structural design and project requirements, considering material properties, condition, tolerances, loads, buckling length and connections.

For steel tubes Ø 355.6 x 8.00 millimeters, Solines Welding & Construction offers sawing to length, expanding tube ends and welding tube sections together to achieve project lengths. Further options include beveling and welding on flanges, base plates, end plates or drilling tips, according to your drawings and application. These operations prepare the tubes for connection and assembly while reducing work on site. Processing details and tolerances are agreed for each order. The tubes are available from stock; processing and delivery schedules are arranged separately.

For a quote on these steel tubes Ø 355.6 x 8.00 millimeters or to discuss processing options, contact Solines B.V. in Moerdijk at +31 168 356655 or sales@solines.nl. You can also ask about the same diameter with a different wall thickness or other specifications. We will discuss your requirements and check availability.

Thick-walled steel tubes Ø 508.0 x 25.00 millimeters in S355J2H to EN 10210 are available directly from stock at Solines. Supplied in individual lengths of 12.5 meters, this batch totals nearly 150 meters and nearly 45 metric tons. The specified inspection document is EN 10204 type 3.1.

With a wall thickness of 25.00 millimeters, this batch offers options for structural steelwork and civil engineering projects. Potential applications include columns, bracing, and temporary shoring. For load-bearing use, material properties, condition, and tolerances must meet the structural design and project requirements.

We can saw these tubes to length to reduce cutting work at your project site. If your connections require weld bevels, ask us to assess the preparation against your drawing. Cut lengths, tolerances, and the processing schedule are agreed in advance. Immediate stock availability applies to the tubes in their offered lengths.

To discuss this batch, contact Solines B.V. in Moerdijk at +31 168 356655 or sales@solines.nl. Looking for the same diameter with a different wall thickness or other specifications? Ask us about the options.

This week, Solines BV in Moerdijk is featuring a new lot of welded square steel tubes measuring 25.0 x 25.0 x 1.00 millimeters, manufactured to EN 10305-5. The lot includes more than 19 kilometers of tubes with a combined weight of over 14 metric tons. These square steel tubes are available immediately from stock in standard lengths of 6,000 millimeters, with 289 tubes per bundle.

Potential applications for these thin-walled square steel tubes include lightweight frames, furniture components, enclosures, and supports for sheet materials. Their flat faces simplify positioning and attaching components, making the square profile a practical option for metal fabrication, furniture manufacturing, and interior construction. The small cross section and thin wall must be considered when designing connections and determining unsupported lengths. Suitability for each application depends on the steel grade, loading, span, and connection design, including the required strength and stiffness.

Solines Welding & Construction can saw these square steel tubes to the lengths specified in your cut list. Receiving tubes cut to length reduces preparation work in your fabrication shop or at the project site, freeing up staff and sawing equipment for other tasks. A coordinated cutting plan can also help reduce offcuts and material waste. Include the required cut lengths, quantities, and length tolerances in your inquiry so Solines can review your requirements and confirm the lead time.

Request a quote for square steel tubes measuring 25.0 x 25.0 x 1.00 millimeters, supplied in standard lengths or cut to length. Contact Solines BV at sales@solines.nl or call +31(0)168 35 66 55 for current availability, technical details, and pricing. Please specify your required quantity, cut lengths, and preferred delivery date. For other section sizes, diameters, or wall thicknesses, Solines supplies a broad range of steel tubes and structural tubes.

This week, Solines BV in Moerdijk is highlighting a new batch of steel tubes. These longitudinally welded steel tubes Ø 610.0 x 12.10 millimeters are available in steel grade S355 JR / EN 10219. Standard lengths are approximately 12,000 millimeters. The batch comprises approximately 900 meters of tubes, with a total weight exceeding 160 metric tons. These steel tubes are available for immediate delivery from stock at Solines BV.

Steel tubes Ø 610.0 x 12.10 millimeters offer potential applications as pile tubes and foundation tubes in civil engineering and infrastructure. They can also serve as casing tubes for foundation work. As bracing tubes, they can support excavation retaining walls; as steel columns, they can form part of load-bearing steel structures. Marine construction applications include guide and fender structures. Suitability is assessed for each project based on structural calculations, material properties, ground conditions, connections, and the required corrosion allowance.

Solines Welding & Construction can cut steel tubes Ø 610.0 x 12.10 millimeters to length, weld sections together, or bevel the ends for welding. Base plates, end plates, flanges, drilling tips, drill heads, pile shoes, and connection plates can also be attached according to your drawings. All welding is performed by experienced, certified welders. These services provide complete custom fabrication for steel construction, civil engineering, and foundation projects, with fabrication tailored to the required delivery lengths, connection details, and on-site assembly.

Looking for longitudinally welded steel tubes Ø 610.0 x 12.10 millimeters for your project? Contact Solines BV for current availability, technical information, or a custom fabrication quote. Include the required quantity, delivery lengths, and fabrication requirements so we can assess your request. If you need a different diameter or wall thickness, Solines supplies a broad range of steel tubes and structural tubes. Email sales@solines.nl or call +31(0)168 35 66 55 to discuss your project.

This week, Solines BV in Moerdijk is highlighting a new batch of longitudinally welded steel tubes Ø 406.4 x 11.10 mm in steel grades L245 and J55. The two grades are stored together in a batch totaling more than 900 meters and weighing nearly 100 metric tons. Standard lengths are approximately 12,000 and 13,000 mm. These tubes are available for immediate delivery from stock at Solines BV.

For foundation work, these tubes can serve as steel tube piles, foundation tubes, or casing to support boreholes. In excavations, potential applications include bracing struts; in load-bearing steel structures, structural tubes can serve as steel columns. These applications span civil engineering and infrastructure projects. In marine construction, potential uses include components of guide structures and fender systems. Suitability depends on the structural design, including loads, effective buckling length, connections, and corrosion allowance.

Solines Welding & Construction can prepare the tubes for their intended use, such as fitting base plates for columns or drilling tips for foundation tubes. Other options include bottom plates, flanges, drill heads, pile points, and structural plates. The tubes can be cut, welded, bell-ended, or beveled for welding. Experienced, certified welders carry out all welding work. Working from your drawings, Solines delivers complete custom fabrication solutions for steel construction, civil engineering, and foundation projects, with the required lengths and connections.

Are you working on a foundation, excavation, or steel construction project that specifies steel tubes Ø 406.4 x 11.10 mm? Discuss your required quantities, lengths, and fabrication requirements with our sales team. For current availability, technical questions, or custom fabrication, contact Solines at sales@solines.nl or +31(0)168 35 66 55. If you need a different diameter or wall thickness, we can help you select from our broad range of steel tubes and structural tubes.

This week, Solines BV in Moerdijk is highlighting an interesting stock lot. It comprises more than 1,000 meters of longitudinally welded steel tubes Ø 219.1 x 3.20 millimeters in steel grade L235. The tubes have standard lengths of approximately 12,000 millimeters, represent a combined weight of more than 17 metric tons, and are available for immediate delivery from Solines BV stock. With a wall thickness of 3.20 millimeters, these are thin-walled structural tubes intended for light-duty and secondary applications.

The diameter-to-wall-thickness ratio makes these structural tubes particularly suitable for fabricated frames, light-duty industrial steel structures, protective guards, enclosures, posts, and lightly loaded steel columns. In civil engineering and infrastructure projects, they may also be used as protective tubes or sleeves for cables and utility lines where external loads are limited. Lightweight machinery frames, supports, and equipment-support structures are other potential applications. Every structural use requires a project-specific assessment to verify that the 3.20-millimeter wall thickness, connection method, and applied loads are compatible with the design.

Solines Welding & Construction can cut the tubes Ø 219.1 x 3.20 millimeters to length, weld them, and cold-form the ends to create a tromped connection. This process is feasible at this wall thickness, allowing tube sections to telescope and be joined efficiently. Depending on the design and application, the tubes can be provided with beveled ends, base plates, end plates, flanges, drill points, drilling heads, pile tips, or structural plates. Heavier connections are evaluated for each project. All welding is performed by experienced, certified welders. Solines can therefore provide complete custom solutions for steel construction, civil engineering, and foundation engineering.

Are you interested in these longitudinally welded steel tubes Ø 219.1 x 3.20 millimeters? For current availability, technical questions, or custom processing, contact sales@solines.nl or call +31 (0)168 35 66 55. If your project requires a different diameter, wall thickness, length, or steel grade, Solines can supply a broad range of steel tubes and structural tubes. Include the intended application, design loads, required lengths, and processing requirements with your inquiry so the appropriate configuration can be matched to the project.

This week, Solines BV in Moerdijk is featuring a new batch. It comprises more than 22,000 meters of galvanized steel tubes in size Ø 26.9 x 2.65 millimeters, with an S235 / EN 10255 specification. The tubes have standard lengths of approximately 6 meters, a combined weight of more than 38 metric tons, and are packed in bundles of 127 tubes. The complete batch is available for immediate delivery from stock at Solines BV.

With dimensions of Ø 26.9 x 2.65 millimeters, these galvanized steel tubes are primarily suited as structural tubes for light-duty, non-primary load-bearing applications. Typical uses include fencing, handrail systems, livestock housing, assembly frames, cable supports, barriers, and supporting components in light steel structures, civil engineering, industrial construction, and infrastructure. The galvanized finish provides additional corrosion protection for outdoor use. Their compact diameter also supports efficient processing in repeat-production applications that require consistent dimensions and relatively low component weight.

Through Solines Welding & Construction, the galvanized steel tubes Ø 26.9 x 2.65 millimeters can be precision-cut to the required project length. Dimensional accuracy and the permitted length tolerance are agreed in advance based on the application and provided specifications. For larger quantities, batch cutting can be used to maintain consistent lengths throughout the order. This delivers tubes that are ready for further processing or installation while minimizing on-site cutting, additional handling, and unnecessary material waste.

Interested in this batch of galvanized steel tubes Ø 26.9 x 2.65 millimeters? Contact Solines BV for current availability, technical questions, or precision cut-to-length services. If a different diameter, wall thickness, steel grade, or finish is a better fit for your project, Solines can supply suitable steel tubes and structural tubes in a wide range of sizes. Email sales@solines.nl or call +31(0)168 35 66 55 to discuss quantities, required lengths, and delivery options.

Solines BV in Moerdijk is featuring a new stock lot this week. In summary, the lot comprises more than 1,800 meters of longitudinally welded steel tubes measuring Ø 559.0 x 9.00 millimeters (outside diameter x wall thickness) in steel grade P355N. The tubes have standard lengths of approximately 12,000 millimeters, a total weight exceeding 225 metric tons, and are available from Solines BV stock for immediate delivery.

Based on their dimensions and P355N steel grade, these structural tubes can be evaluated for project-specific use as pile tubes, steel foundation piles, and foundation tubes, as well as casing or sleeve tubes for foundation work, steel columns in load-bearing and industrial steel structures, and tubular struts in temporary support structures. In civil engineering, infrastructure, and marine construction, potential uses also include guide structures, fender systems, and other marine structures. Final suitability depends on design loads, soil conditions, installation methods, corrosion exposure, connections, and available material certificates.

Solines Welding & Construction can cut the tubes to length using band saws suitable for diameters up to approximately Ø 820 millimeters. The tubes can also be extended using circumferential welds, prepared with a weld bevel, and fitted with base plates, bottom plates, flanges, drill tips, drill heads, fabricated end points, or structural plates. Solines can weld tubes up to Ø 1,420 millimeters and supply assembled lengths up to 40,000 millimeters. All welding is performed by experienced welders, enabling Solines to provide complete custom-fabricated solutions for steel construction, civil engineering, and foundation engineering.

Interested in these longitudinally welded steel tubes Ø 559.0 x 9.00 millimeters? Contact Solines for current availability, material certificates, technical questions, or a custom fabrication quote. If your project requires a different diameter, wall thickness, steel grade, or length, Solines can supply a broad range of steel tubes, structural tubes, and foundation tubes. Email your specifications or project drawings to sales@solines.nl or call +31 (0)168 35 66 55 to discuss delivery options and fabrication requirements with the sales team.